Puncture repair
There are many possible causes for a tire blowout.
Appropriate repairs cannot be made based on the tire surface alone.
At Mr. Tireman Fussa store, we separate the tire from the wheel, check the condition of the inside of the tire, and then determine the appropriate repair method.
Even if the damage is minimal on the outside, the effects of driving with a flat tire can damage not only the rubber but also the cords that form the skeleton of the tire, making it unsuitable for reuse even after repairs.
Appropriate repairs cannot be made based on the tire surface alone.
At Mr. Tireman Fussa store, we separate the tire from the wheel, check the condition of the inside of the tire, and then determine the appropriate repair method.
Even if the damage is minimal on the outside, the effects of driving with a flat tire can damage not only the rubber but also the cords that form the skeleton of the tire, making it unsuitable for reuse even after repairs.
Plug Repair
Check the size and direction of the damage and repair it by inserting a plug from the inside of the tire.
The plug size is determined based on the size of the wound.
The plug size is determined based on the size of the wound.
Plug + inner surface patch repair
Plug repairs are reinforced with an internal patch for added safety.
Burn-on repair
A baking repair is a repair method that uses heat to melt raw rubber and seal the wound.
We can repair scratches on the sidewalls and shoulders that cannot be repaired with a plug.
We can repair scratches on the sidewalls and shoulders that cannot be repaired with a plug.
It does not enlarge the wound more than necessary and is more complete than an internal patch repair.
We do not accept repairs on the side or shoulder areas of low-profile tires where the heating plate of the repair machine cannot reach firmly from the inside.
Boiler burn repair have been discontinued due to the aging of the repair equipment.
We are not currently accepting applications.
Boiler burn repair
It can handle a wide range of scratches that cannot be repaired with a typical baking repair machine.
We operate our steam boiler on a 7-10 day cycle, so reservations are required.
We operate our steam boiler on a 7-10 day cycle, so reservations are required.
Due to preparation requirements, we will keep the tire to be repaired for 2-3 days before the work date.
